The Goyen 200 Series Pulse Controller is an advanced microprocessor controller of the cleaning system in reverse pulse filters and pneumatic systems.
The 200 Series Pulse Controller can operate in the following modes:
* Off
* Manual
* Automatic
In AUTOMATIC mode, sequential cleaning is initiated only when the differential pressure (DP) across the filter reaches a predetermined level. Once the DP is reduced to an acceptable level, sequential cleaning ceases.
Features of the 200 Series Pulse Controller include:
* Adjustable pulse on time to 1m sec. Range 10 to 999ms.
* Adjustable pause time to 1sec. Range 1 to 999 sec.
* Microprocessor control eliminates drift.
* Pause in after cleaning option adjustable to 1sec. Range 1 to 99sec.
* Fast set up.
* Number of after cleaning cycles adjustable from 0-99.
* Automatic shutdown from integral Delta P switch (no wiring).
* Alarm options.
* Fast set up.
* Valve diagnostic display.
* Low air pressure option.
* Self-diagnostic function.
* Valve firing display.
* Display of current differential pressure. | 
